Delupet shock collars offer adjustable vibration, beep, and shock settings to aid dog training. The DT‑68 and DT‑66 models feature a remote control and user‑friendly manual for safe, effective use. Follow the guide for proper setup and operation. Use to calibrate settings and ensure humane training

Safety Precautions

Before using a Delupet shock collar, read the manual and understand its functions. The collar delivers electrical stimulation, so handle it responsibly. Keep the battery compartment closed and use only the supplied charger. Do not expose the charger or collar to water or moisture, and avoid using it on dogs with skin conditions, open wounds, or medical implants such as pacemakers. Additionally, always verify the collar’s fit before each session and never use the device on a dog that is ill or under medication that may affect sensitivity. Remember, consistent use and gradual progression are key to training!!

• Fit the collar snugly but not too tight; a loose collar may slip, a tight one may cause injury.
• Never use on a frightened, aggressive, or distressed dog; shock can worsen fear.
• Start with the lowest shock level and increase only if the dog responds appropriately.
• Never leave the collar on for long periods; use only during training and remove afterward.
• Keep the remote out of reach of children and pets; its battery can be hazardous if ingested.
• Inspect the collar for scratches or damage before each use; replace damaged parts immediately.
• Store the collar and remote in a dry, cool place when not in use; avoid extreme temperatures or sunlight.
• Follow local regulations on electronic training devices; some jurisdictions restrict or prohibit shock collars.
• Consult a veterinarian if your dog has health issues that might be affected by electrical stimulation.
• Always supervise the dog during training to prevent accidental over‑stimulation or misuse.

By following these precautions, you help ensure the safety and well‑being of your dog while using the Delupet shock collar.

Unboxing and Components

Open the box to reveal DT‑68 collar, a rechargeable battery, a remote, and a quick start guide. The collar features adjustable vibration, beep, and shock settings, while the remote offers separate buttons for each function. All parts are clearly labeled for easy setup!!

Remote Control Overview

The Delupet remote is a compact, ergonomic device that serves as the command center for the DT‑68 and DT‑66 shock collars. It features a clear LCD display that shows battery status, selected mode, and intensity level. Three distinct buttons—Beep, Vibration, and Shock—allow the trainer to issue commands quickly and accurately. The Beep button emits a short, non‑adjustable tone that signals the collar to respond. The Vibration button triggers a single pulse of vibration, useful for gentle reminders. The Shock button delivers a static electric pulse at the currently chosen intensity. Each button has a tactile click and a small LED indicator that lights up when pressed, providing instant visual feedback. The remote also includes a pair of side buttons that control the intensity slider. By pressing the left or right side button, the user can increase or decrease the vibration or shock level from 1 to 9, depending on the selected mode. The remote’s battery compartment houses a rechargeable lithium‑ion cell; the device can be charged via a micro‑USB port, and a charging indicator LED turns green when fully charged. Pairing the remote with the collar is a straightforward process: power on the collar, press the pairing button on the collar’s back, then press the pairing button on the remote until the LED flashes twice, confirming a successful connection. The remote’s firmware includes a timeout feature: if no command is sent for 30 minutes, the remote automatically enters low‑power mode, reducing the risk of accidental stimulation. The design prioritizes durability; the remote’s housing is made from impact‑resistant ABS plastic, and the buttons are sealed against dust and moisture. Overall, the Delupet remote provides a reliable, user‑friendly interface that enables precise control over the collar’s training functions, ensuring both effectiveness and safety during training sessions.

The remote’s battery life lasts up to 20 hours and charges in about 90 minutes. Its ergonomic shape and silicone grip provide a firm hold during training. The LED status light indicates mode: green for vibration, blue for shock, amber for beep. Firmware updates via a companion app add new features. It also offers a mute mode. The remote’s compact design fits easily in a pocket or bag, making it convenient for on‑the‑go training.

Collar Parts

The Delupet shock collar consists of several key components designed for durability and precise functionality. The main body is a flexible, adjustable strap made from high‑density neoprene that comfortably fits a wide range of dog sizes. It features a quick‑release buckle and a padded collar collar to prevent chafing during extended use. The power module is a compact, sealed unit that houses the battery, charging contacts, and the electronic circuitry that controls the shock, vibration, and beep. This module is secured to the strap with a reinforced zip‑fastener, ensuring it stays in place during vigorous activity These pads are removable for cleaning and can be replaced if worn. The control panel includes a small LCD screen that displays the current mode and intensity level, along with a set of push‑buttons for selecting beep, vibration, or shock. The panel is protected by a rubberized cover to shield it from moisture and accidental knocks. A dedicated charging port, typically a micro‑USB connector, allows for quick recharging of the internal lithium‑ion battery. The collar also features a built‑in safety switch that disables all functions when pressed, providing an emergency stop in case of accidental over‑stimulation. Finally, a detachable leash attachment point is integrated into the strap, enabling the collar to be used in conjunction with a standard leash for controlled training sessions. Each part is engineered to meet rigorous safety standards, ensuring reliable performance while minimizing risk to the animal.

Initial Setup

Begin by charging the collar fully using the supplied micro‑USB cable. Once charged, press the power button until the LED blinks, indicating readiness. Then, activate the remote by holding its sync button until it flashes, completing pairing. Test each mode before use. Now.!!!

Charging the Collar

Before first use, fully charge the Delupet collar to ensure consistent performance. Connect the included micro‑USB cable to the collar’s charging port and plug the other end into a USB power source (wall adapter, computer, or power bank). The collar’s LED will flash amber during charging and turn green once fully charged. A full charge typically takes about 4–5 hours, but the exact time can vary depending on the power source and battery condition. For optimal longevity, avoid charging to 100 % on a daily basis; instead, aim for a 70–80 % charge level. If you need to recharge quickly, use a higher‑output USB adapter (5 V/2 A) to reduce charging time. Always keep the collar dry and free from dust during charging. After charging, remove the cable and allow the collar to cool for a few minutes before attaching it to your dog. Proper charging ensures that vibration, beep, and shock functions operate at the selected intensity levels, providing reliable training signals. The collar’s battery indicator can be checked by pressing the power button; a steady green light indicates a full charge, while a blinking light shows it is still charging. If the collar does not power on after charging, leave it connected for an additional 30 minutes. Do not overcharge; the collar’s internal circuitry will shut off once fully charged. Store the collar in a cool, dry place when not in use. If you plan to travel, keep the collar in its protective case to prevent accidental damage. Regular charging cycles help maintain battery health and extend overall lifespan. For best results, charge the collar at least once per week if it is used daily, or at least once every two weeks if used less frequently. This routine keeps the battery ready for immediate deployment during training sessions. The manufacturer recommends using the supplied charger rather than third‑party USB ports to avoid voltage fluctuations that could damage the internal electronics. If you notice any swelling of the battery or unusual heat, discontinue use immediately and contact customer support. By following these charging guidelines, you ensure safe, efficient, and reliable operation of your Delupet shock collar during training. Remember to always inspect the charging port for debris before each use. A clean port ensures a secure connection and prevents charging interruptions. If you encounter a charging error, reset the collar by holding the power button for 10 seconds until the LED flashes, then reconnect. This reset can resolve minor software glitches that affect charging. Finally, keep a spare charger in your training kit; a backup ensures that you never miss a session due to a dead battery. Following these steps guarantees that your Delupet collar remains ready for training, delivering consistent signals with confidence.

Pairing the Remote

To synchronize the Delupet remote with the collar, first ensure both devices are powered on. Press the power button on the collar until the LED flashes red, indicating it is in pairing mode. Within 30 seconds, press the pairing button on the remote; the remote’s LED will flash blue. Once the LEDs on both devices align, the collar will emit a short beep, confirming a successful connection. If the pairing fails, reset both units by holding the power button on each for 10 seconds until the LED turns off, then repeat the process. The remote will automatically lock onto the collar’s frequency, allowing you to use vibration, beep, and shock commands. For optimal performance, keep the devices within 30 feet of each other during pairing and avoid interference from other wireless devices. After pairing, test each function by pressing the corresponding button on the remote; the collar should respond with a beep, vibration, or shock at the preset intensity. If the collar does not respond, re‑pair by repeating the steps above. The pairing process is designed to be quick and user‑friendly, ensuring that trainers can focus on training rather than technical setup. Always keep the remote’s firmware updated; check the manufacturer’s website for updates that may improve connectivity. A properly paired remote guarantees reliable communication, essential for consistent training signals and the safety of both dog and handler. During pairing, the remote’s LED will flash rapidly, and the collar’s LED will blink twice. This visual cue indicates that the remote has successfully linked. If you experience latency, ensure that the collar’s battery is fully charged and that no other Bluetooth devices are nearby. The pairing algorithm uses a rolling code system to prevent replay attacks, ensuring that each command is unique. After pairing, you can lock the remote to the collar by pressing the lock button on the remote; this prevents accidental disconnection. If you need to pair a second remote, first disconnect the existing remote by holding its power button until the LED turns off, then repeat the pairing steps. The remote’s battery life is indicated by a series of LED flashes; a single flash means full charge, while a rapid flash indicates low battery. For troubleshooting, consult the troubleshooting section in the manual, which covers common pairing issues such as interference, low battery, and firmware mismatches. By following these steps, you can maintain a stable connection and ensure that your training sessions proceed smoothly. Remember to store the remote in its protective case when not in use to prevent accidental button presses.

Command Functions

The Delupet collar offers three core commands: Beep, Vibration, and Shock. The Beep emits a fixed tone, the Vibration pulses at selectable levels 1‑9, and the Shock delivers static stimulation at chosen intensity. Use each to reinforce training cues for optimal results!

Beep Command

The beep function on a Delupet shock collar is a non‑adjustable auditory cue that signals dog without applying. When the remote’s beep button is pressed, the collar emits a short, high‑frequency tone that is loud enough to capture the animal’s attention from a distance of up to 30 feet. The purpose of the beep is to establish a clear, consistent sound that the dog associates with the trainer’s presence and intent. Because the volume is fixed, the user does not need to calibrate it; however, it is crucial to ensure that the collar is properly fitted and that the dog’s hearing is intact. A well‑placed beep can interrupt unwanted behavior, redirect focus, or reinforce a desired action, serving as a gentle reminder before any vibration or shock is applied. To use the beep effectively, keep the remote within line of sight, press the button once, and observe the dog’s reaction. If the dog ignores the tone, try moving closer or adjusting the collar’s position to improve signal clarity. Consistent use of the beep command helps build a reliable communication channel between owner and pet, making subsequent training steps more efficient and humane. The beep is especially useful in noisy environments where other cues may be masked, as its distinct pitch stands out against background noise. By mastering the beep, trainers can create a structured routine that gradually introduces more intense commands, ensuring the dog learns to respond to signals before any corrective shock is delivered. This approach aligns with modern training philosophies that prioritize positive reinforcement and clear, predictable cues over abrupt punishment. Because the beep is non‑contact, it can be used in outdoor settings without disturbing the dog’s natural behavior. Trainers often pair the beep with a verbal cue to reinforce learning, ensuring the dog understands the association between the sound and the desired action, which enhances the effectiveness of the training process while maintaining a humane approach to dog training.

Vibration Command

The vibration command on a Delupet shock collar provides a gentle, non‑contact cue that signals the dog without electrical stimulation. To activate the vibration, press the dedicated vibration button on the remote; the collar will emit a brief, pulsing vibration lasting about one second. This tactile signal captures the animal’s attention and can reinforce positive behavior or interrupt unwanted actions. The intensity is adjustable, allowing trainers to tailor the stimulus to the dog’s sensitivity and training environment. After pressing the vibration button, use the side adjustment button to increase or decrease the level from 1 to 9. Level 1 delivers a mild buzz suitable for small or sensitive dogs, while level 9 offers a stronger vibration noticeable in noisy or outdoor settings. To set the desired intensity, hold the side button until the collar’s LED indicator flashes the chosen level, then release it. Testing each level ensures the dog responds appropriately and avoids overstimulation. Keep.

Shock Command

The shock command delivers a calibrated electric stimulus that serves as a corrective cue in training. To initiate a shock, press the static button on the remote; the collar will emit a single pulse of the currently selected intensity. The intensity can be set from 1 to 9 by using the side vibration button after pressing the static button. Hold the side button until the collar’s LED indicator flashes the desired level, then release it. Level 1 provides a mild shock suitable for gentle correction, while level 9 offers a stronger stimulus for more persistent behavior. The shock is delivered to the collar’s contact area, ensuring even distribution across the dog’s neck. It is important to test the shock level on a small area of the collar first to confirm the dog’s reaction and to avoid over‑stimulation. The static nature of the shock means it remains constant until the next command is issued. Use the shock command sparingly and only after the dog has been trained to respond to the beep and vibration cues. Proper use of the shock command can reinforce boundaries and improve obedience when combined with positive reinforcement techniques. Always monitor the dog’s behavior and adjust the intensity accordingly to maintain humane training practices.

The collar’s firmware logs shock events, allowing trainers to review session data via the app. Each pulse is recorded with timestamp and intensity, giving insight into training patterns. This feature promotes daily regular use of the shock command

Intensity Adjustment

Adjust vibration and shock levels by pressing the side vibration button after selecting the command. Cycle through 1‑9 levels; each flash indicates the current setting. Higher numbers increase stimulus strength. Use gradual increments to ensure comfort and effective training. Adjust level as needed!.

Vibration Levels (1‑9)

Delupet shock collars feature nine vibration levels, enabling trainers to tailor the stimulus to each dog’s temperament. The vibration mode is triggered by pressing the vibration button on the remote; the collar’s receiver then emits a brief, non‑painful vibration that acts as a gentle reminder or corrective cue.

To set the intensity, press the side vibration button after selecting the vibration command. The collar’s LED flashes to indicate the current level. Each press cycles through 1 (softest) to 9 (strongest). Lower levels are ideal for initial introductions, while higher levels are reserved for advanced training or when the dog is distracted.

Calibrate the vibration by starting at the lowest level and gradually increasing until the dog responds appropriately. If the dog shows signs of discomfort or avoidance, reduce the level. Consistency in using the same intensity for specific commands helps the dog learn the association more quickly.

Use vibration as a positive reinforcement tool before resorting to shock. Pair the vibration cue with a verbal command or a physical prompt to reinforce the desired behavior. Keep the remote’s battery charged and the collar’s firmware updated for optimal performance.

Safety is paramount; never exceed level 9 unless absolutely necessary. Document the level used each session to track progress and avoid over‑stimulation. Mastering vibration levels creates a balanced humane training routine that respects the dog’s well‑being. Use these settings for results

Shock Levels (1‑9)

Delupet shock collars provide nine distinct shock levels, allowing trainers to calibrate intensity. The shock mode is activated by pressing the static button on the remote; the collar delivers a brief, non‑continuous electric pulse that serves as a corrective signal;

To adjust the shock intensity, press the side vibration button after selecting the shock command. The collar’s LED flashes the current level. Each press increments from 1 (mildest) to 9 (strongest). Start at level 1 for new dogs and increase only when the dog fails to respond.

When setting a shock level, observe the dog’s reaction closely. A well‑timed, moderate shock (levels 3‑5) often suffices to correct unwanted behavior, while higher levels (6‑9) should be reserved for persistent issues or when the dog is highly distracted. Avoid exceeding level 9 unless absolutely necessary, as it can cause distress or injury.

Document the chosen level for each training session to track progress and ensure consistency. Pair the shock cue with a clear verbal command or a physical cue to reinforce the association. Keep the remote’s battery charged and the collar’s firmware updated to maintain reliable performance.

Using shock levels responsibly and ethically is essential for humane training. Always start low, monitor the dog’s response, and adjust only as needed. This balanced approach helps build trust while effectively correcting behavior. Apply these guidelines for safe, effective training.